Full paste and manufacturing process, prevent sliding foam, bring you a more comfortable sense of sleep at the same time moistening pad from top to bottom uniform distribution of pores, more suitable for ergonomics, so that users lie down more comfortable, relieve the fatigue after a day of outdoor fatigue.
1. First use:
1) Spread out the air cushion
2) Open the air nozzle to make the air mattress expand automatically. Close the air nozzle, fold the air cushion bed in half repeatedly, and then press hard for several times, and then open the valve, so that the air cushion bed automatically expands, so that it fully recovers its elasticity and shape.
2. Inflation method:
1) Spread out the air cushion and open the air nozzle. The air cushion bed will automatically start to expand.
2) Please wait until the air mattress has expanded, and then tighten the air nozzle cover.
3) Adjust the air pressure and adjust its comfortable hardness. Note: If it has been kept in the rolled state for a long time (not recommended), please inflate it with the mouth several times to restore elasticity.
3, exhaust method:
1) Open the air nozzle and roll it up from the other end of the air nozzle to press out air.
2) Close the air nozzle, roll up the air cushion bed by the other end, and open the air nozzle again to discharge the residual air.
3) Finally close the valve, at any time can be rolled state preservation. Note: Please put it in the outsourcing bag to avoid scratching.
4. Storage method: Spread out the air cushion, open the air nozzle, and store it in a cool and dry place (example: under the bed or behind the sofa, etc.), because the sponge of the air cushion bed has a memory shape and can quickly expand into the most commonly used shape.
5. Repair method:
1) Confirm the place of air leakage: close the valve after blowing expansion, wet the surface with water or dilute soapy water, fold it into half, press with your knee to pressure your body weight, the bubbling place is the place of air leakage, please make a mark.
2) Repair of small holes: dry the air cushion bed completely, drain the air, and drop a follow-up agent on the hole. As the air is drained, the agent is then sucked in, sealing the hole. Then wait and then harden.
3) Major damage repair: completely dry and deflate the air mattress, apply glue to the repair cloth, apply glue to the holes on the surface of the air mattress, dry for 30 seconds to 3 minutes (depending on the temperature), fit on the damaged area, flatten, and keep for 4 hours before use.
6, cleaning: the air mattress expansion to the maximum limit, tightly close the valve, with soft brush and low stimulation of home degreasing detergent or lotion, wash in the bathtub with water thoroughly washed, completely dry after preservation.
7. Precautions:
1) Do not approach sharp things (plants with thorns or sharp stones or blades).
2) When the tent is not in use, please lay the bottom cloth under the air mattress.
3) Do not use it as a floating device.
4) Stay away from flames or sparks.
5) When the temperature is high, do not put the air mattress which expands and closes the valve in the car or tent.
6) Do not touch sunscreen or alkaline drugs.
7) Do not be exposed to the sun for a long time, UV will make the surface of the material slowly damaged.
8) Keep out of reach of pets.
9) The gas nozzle part is hard, and it should be avoided at rest.
